This insanely strong center link has been engineered to maintain all factory alignment specs and steering geometry. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to whats offered from factory on all non Hummer GM HD Trucks. Can be used with GM or aftermarket Idler / Pitman arms. Will work with the PISK support system. The PISK system should be run if you are going to be 4 wheel launching or Sled Pulling.
If installing KRYPTONITE series center link on a leveled truck you may need to install longer swaybar endlinks depending on how high the torsion bars have been adjusted. We recommend the Kryptonite HD swaybar endlinks. This kit will only work on trucks that keep the center link in the factory position. If your truck has been lifted make sure the lift kit you have is a spindle style kit not a control arm drop.
- 1 x Kryptonite Series Solid Center Link
- 2 x Kryptonite Series Tie Rods
- Size: 1- 5/8 inch Hexagonal
- Material: 1144 Stress Proof Carbon Steel.
- Finish: Zinc